Protectcoat Wood SR

Description

Wood Cleaner | Brings the natural wood colour back!

Protectcoat Wood SR is water-based wood cleaner. The wood cleaner is a biodegradable product and made from natural ingredients. Protectcoat Wood SR will wood turn back to the original warm tones. This product can also rescue the surface from stain caused surface mould, watermarks, rust etc. The Protectcoat Wood SR is easy to use.

Advantages

• Protectcoat Wood SR is an effective woodcleaner.
• The woodcleaner is a water-based product and made of natural ingredients.
• Biodegradable.
• Protectcoat Wood cleaner can be used on a wide range of wood.
  
  

Use

Protectcoat Wood SR can be used on:

• Wooden beams
• Fences
• Wooden furniture
• Oak etc.

Application

Application

• Use a brush or roller.
• apply the wood cleaner generously in the direction of the wood grain.
• For large areas, treat approximately 2m² at a time to prevent the product drying out.
• Leave the Protectcoat Wood SR for 15-30 minutes.
• On dirty wood use a non-metal brush.
• Rinse thoroughly with clean water. It is not reccomended to use a pressure washer on wood.
  
  

Recommendation

Always read the description before use. (See downloads)

Always carry out a test first to ensure the finished result is acceptable.

Allow wood to dry fully for 24 - 48 hours before treating with a protective finish.
Keep this product away from metal and calcareous stone. If contact, wipe away immediately and rinse with water.

KEEP OUT OF THE REACH OF CHILDREN!

Product information

Downloads

Technical Data Sheet